Home>mall>Electronics

Geekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000M

4.7305
$15.99 / $19.51
  • *Name:

  • *Email:

  • *Phone:

  • *Quantity:

  • *Content:

  • Attachment:

    Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$2.00 / $19.51

గ్యారంటీడ్ సేఫ్ చెక్అవుట్

ఉచిత బహుమతి
ఏదైనా కొనుగోలుతో ఉచిత బహుమతి
షిప్పింగ్ పాలసీ
$9.9 కంటే ఎక్కువ ఆర్డర్లకు ఉచిత ప్రామాణిక షిప్పింగ్
రిటర్న్ పాలసీ
సరుకులు అందుకున్న తేదీ నుండి 40 రోజుల్లో తిరిగి అంగీకరించబడతాయి. కస్టమైజ్ చేసిన వస్తువులు తిరిగి లేదా మార్పిడి చేయలేము. ఇ-గిఫ్ట్ కార్డ్‌తో కొనుగోలు చేసిన వస్తువులు మార్పిడి మాత్రమే; రీఫండ్లు వర్తించవు.

ఉచిత బహుమతి

Roymall కు స్వాగతం, ప్రీమియం డిపార్ట్‌మెంట్ స్టోర్ గిఫ్ట్స్ కొనుగోలు కోసం మీ ప్రొఫెషనల్ వెబ్‌సైట్. మేము మీ మద్దతును అధికంగా విలువైనదిగా మరియు ప్రశంసిస్తున్నాము, మరియు మేము మీ కొనుగోళ్లతో అదనపు ఉత్సాహాన్ని జోడించడం ద్వారా మా కృతజ్ఞతను వ్యక్తపరుస్తాము. మీరు మాతో షాపింగ్ చేసినప్పుడు, మీరు మీ జీవితశైలిని మెరుగుపరిచే అధిక-నాణ్యత ఉత్పత్తులను ఆస్వాదించడమే కాకుండా, మీరు ఉంచిన ప్రతి ఆర్డర్‌తో ప్రత్యేక ఉచిత బహుమతిని కూడా పొందుతారు. మా సేకరణను అన్వేషించడానికి మరియు మీ పర్ఫెక్ట్ గిఫ్ట్స్‌ను కనుగొనడానికి సిద్ధంగా ఉన్నారా? మా ప్రీమియం డిపార్ట్‌మెంట్ స్టోర్ అంశాల ఎంపికను బ్రౌజ్ చేయండి, మీ ఆర్డర్‌ను ఉంచండి మరియు మీ కొనుగోలుతో పాటు మీ ఉచిత బహుమతి రావడం యొక్క ఉత్సాహాన్ని ఎదురు చూడండి.

షిప్పింగ్ పాలసీ

మేము మీ ఆర్డర్లను స్వీకరించిన తర్వాత మీకు వస్తువులను పంపడానికి కఠినంగా పని చేస్తాము మరియు అవి సురక్షితంగా చేరుకునేలా చూస్తాము. డెలివరీ వివరాలు మీ నిర్ధారణ ఇమెయిల్‌లో అందించబడతాయి.చాలా సందర్భాల్లో, ఆర్డర్లు 2 రోజుల్లో ప్రాసెస్ చేయబడతాయి.ప్రత్యేక సందర్భాల్లో, ఇది ఈ క్రింది విధంగా ఆలస్యం అవుతుంది: మీరు శనివారం, ఆదివారం లేదా పబ్లిక్ హాలిడేలలో ఆర్డర్ చేసినప్పుడు, అది 2 రోజుల ఆలస్యం అవుతుంది..సాధారణంగా, ఫ్లైట్ ఆలస్యం లేదా ఇతర పర్యావరణ కారకాలచే ప్రభావితం కాకుండా 5-7 వర్కింగ్ రోజులు (సోమవారం నుండి శుక్రవారం) అవసరం..మా షిప్పింగ్ సర్వీస్ ప్రపంచవ్యాప్తంగా ఉన్నందున డెలివరీ సమయాలు మీ స్థానంపై ఆధారపడి ఉంటాయి కాబట్టి మీరు రిమోట్ జిల్లాలు లేదా దేశాలలో ఉంటే కొన్ని సార్లు అవసరం కావచ్చు మరియు దయచేసి ఓపికగా వేచి ఉండండి.

1. రిటర్న్ & ఎక్స్ఛేంజ్ పాలసీ

మేము roymall.com నుండి కొనుగోలు చేసిన వస్తువులను మాత్రమే అంగీకరిస్తాము. మీరు మా స్థానిక డిస్ట్రిబ్యూటర్లు లేదా ఇతర రిటైలర్ల నుండి కొనుగోలు చేస్తే, మీరు వాటిని మా వైపు తిరిగి ఇవ్వలేరు. ఫైనల్ సేల్స్ అంశాలు లేదా ఉచిత బహుమతులు తిరిగి స్వీకరించదగినవి కావు. తిరిగి పొందడానికి అర్హత పొందడానికి, మీ అంశం ఉపయోగించబడకుండా మరియు మీరు అందుకున్న పరిస్థితిలో ఉండాలి. ఇది అసలు ప్యాకేజింగ్‌లో కూడా ఉండాలి.మా నుండి తిరిగి సూచనలను అందుకున్న తర్వాత, దయచేసి మీ తిరిగి వచ్చిన వస్తువులను ప్యాక్ చేయండి మరియు మీ ప్యాకేజీని స్థానిక పోస్టాఫీసు లేదా మరొక కొరియర్ వద్ద డ్రాప్ చేయండి.
మేము అందుకున్న తర్వాత 3-5 వర్కింగ్ రోజుల్లో మీ తిరిగి లేదా మార్పిడి అంశాన్ని ప్రాసెస్ చేస్తాము. రీఫండ్ మీ అసలు చెల్లింపు పద్ధతికి స్వయంచాలకంగా ప్రాసెస్ చేయబడుతుంది మరియు క్రెడిట్ చేయబడుతుంది.కస్టమ్ ఉత్పత్తి చేయబడిన ఉత్పత్తిని తిరిగి లేదా మార్పిడి చేయలేము, ఇందులో కస్టమ్ పరిమాణం, కస్టమ్ రంగు లేదా కస్టమ్ ప్రింట్ ఉంటుంది.మరింత సహాయం అవసరం, దయచేసి మమ్మల్ని సంప్రదించండి. service@roymall.com లేదా Whatsapp: +8619359849471

2.రీఫండ్ పాలసీ

మేము తిరిగి వచ్చిన ప్యాకేజీని స్వీకరించి తనిఖీ చేసిన తర్వాత మీరు పూర్తి రీఫండ్ లేదా 100% స్టోర్ క్రెడిట్ పొందుతారు. రీఫండ్ మీ అసలు చెల్లింపు పద్ధతికి స్వయంచాలకంగా ప్రాసెస్ చేయబడుతుంది మరియు క్రెడిట్ చేయబడుతుంది. షిప్పింగ్ ఖర్చులు మరియు ఏదైనా విధులు లేదా ఫీజులు రీఫండ్ చేయదగినవి కాదని గమనించండి. ప్యాకేజీ షిప్ చేయబడిన తర్వాత అదనపు షిప్పింగ్ ఖర్చులు రీఫండ్ చేయబడవు. మీరు ఈ ఫీజులను చెల్లించడానికి బాధ్యత వహిస్తారు మరియు ఆర్డర్ మాకు తిరిగి వస్తే కూడా వాటిని మాఫీ చేయలేము లేదా వాటిని తిరిగి ఇవ్వలేము.మేము అందుకున్నాము మరియు మీ తిరిగి వచ్చిన అంశాన్ని నిర్ధారించిన తర్వాత, మేము మీకు ఇమెయిల్ పంపుతాము మీరు మీ తిరిగి వచ్చిన అంశాన్ని అందుకున్నామని మీకు తెలియజేయడానికి. మేము మీ రీఫండ్ యొక్క ఆమోదం లేదా తిరస్కరణ గురించి కూడా మీకు తెలియజేస్తాము.మీకు రీఫండ్ ప్రక్రియకు సంబంధించిన ఏవైనా సమస్యలు ఉంటే, దయచేసి మమ్మల్ని సంప్రదించండి. service@roymall.com లేదా Whatsapp: +8619359849471

Update information: Change chip from SI4463 to SI4438 (Shipped from 11.26.2019)


Note: HC-11 cannot communicate with the HC-12, they work independently, used in pairs.
Features:

1. Supply voltage: 3.2V~5.5V. (If the module you want to work long hours in the emission state, it is recommended that when the supply voltage exceeds 4.5V threaded a 1N4007 diode to prevent module built-in LDO heated)2. Default address range (open field test): About 600m (maximum communication distance adjustable reach 1000m, the baud rate is 500bps)3. Default idle current: 16MA (In different working modes operating current is different)4. Module dimensions: 27.8 x 14.4 x 4mm5. Operating frequency range: 433.4-473.0MHz, up to 100 channels of communication6. The maximum transmit power: 100mW (settable)7. Module support software upgrade8. Default factory settings: Mode FU3, baud rate is 9600bps, communication channels CH001 (433.4M)

9. Four transparent transmission modes, adapt to different application occasions.

10. Built-in MCU, free of programming, only need to communicate with external devices through the serial port

11. Unlimited number of bytes sent in a single time (FU1 / FU3 mode)

12. The module supports one-to-one, one-to-many, many-to-one, many-to-many connection transparent transmission


Parameter nameReferenceParameter nameReference
ModelHC-12Module size27.4 x13.2 x 4mm
Frequency Range433.4 ~ 473.0MHZWorking frequency433.4-473.0MHz
Communication InterfaceUART 3.3V / 5V TTL levelAntenna interfaceSpring antenna / antenna socket
Operating Voltage3.2-5.5VIdle current16mA
Communication level3.3V / 5V levelWorking humidity10% ~ 90%
Transmit power20dBm (MAX)Operating temperature-25 ° C ~ + 75 ° C
Reference distance1000mStorage temperature-40 ° C ~ + 85 ° C
AT command set:

Module parameters, AT command setAT command is used to set the parameters of the function module and switching modules need to exit the setting mode after setting to take effect. Meanwhile, modify the parameters and functions, power-down is not lost.
Enter the command mode:
The first entry mode - normal use (has the power) in the first 5-pin "SET" is set low;The second mode of entry - power, 5th pin "SET" again first set low on power.Both methods can make the module into AT command mode, release ("SET" pin is not connected low) to exit command mode. After the exit command mode, if you change the module function, the function will be cut to the appropriate state.The second way is fixed in serial format 9600, N, 1 into the AT.
Instructions:
1. AT
Test instructionsExample: Send module commands "AT", the module returns "OK".
2. AT + Bxxxx
Change the serial port baud rate command. You can set the baud rate is 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps and 115200bps. The factory default is 9600bps.Example: Set the module serial port baud rate is 19200bps, please send module command "AT + B19200", the module returns "OK + B19200".
3. AT + Cxxx
Change the wireless communication channel, selectable from 001 to 127 (more than 100 radio channels after the communication distance not guaranteed). The default value is 001 radio channels, operating frequency is 433.4MHz. Step channel is 400KHz, the operating frequency of the channel 100 is 473.0 MHz.
Example:
Set module to channel 21, please send module command "AT + C021", the module returns "OK + C021".After exiting the command mode, the module in the first 21 channels, operating frequency is 441.4 MHz.Note: Because the wireless receiver module sensitivity HC-12 is relatively high, the baud rate is greater than when air 58000 bps, 5 must be shifted to the adjacent channel use. When the air baud rate is not greater than 58000 bps, if the short distance (10 meters) communication, but also need to stagger five adjacent channel use.
4. AT + FUx
Change the module serial pass-through mode, there FU1, FU2 and FU3 three modes. Module default mode is FU3, two serial pass-through mode module must be set to the same communication. See detailed above, "wireless serial pass-through" part.Example: Send module commands "AT + FU1", the module returns "AT + OK".
5. AT + Px
The default setting is 8, maximum transmit power, communication distances. Transmit power level is set to 1, the minimum transmission power. In general, the transmission power of each drop 6dB, communication distance will be reduced by half.Example: Send module commands "AT + P 5", the module returns "OK + P5". After exiting the command mode, the module transmit power is +11 dBm.

Four transparent transmission modes of the module:


The HC-12 module has four serial port transparent transmission modes denoted by FU1, FU2, FU3 and FU4. When using each mode, all you need to do is to send and receive serial data. You do not need to control the wireless transmission part in the air, but you can only communicate with each other at the same air baud rate!

FU1: (send AT + FU1 in more power-saving mode) The idle working current of the module is about 3.6mA. In this mode, 8 kinds of serial port baud rates can be set, and the air baud rate is unified to 250000bps

FU2: (send AT + FU2 in power saving mode) The idle working current of the module is about 80uA. Under the mode, the module only supports the serial baud rate of 1200bps, 2400bps and 4800bps, and the air baud rate is unified to 250000bps

FU3: (send AT + FU3 in full speed mode (factory default)) The idle working current of the module is about 16mA. The module will automatically adjust the wireless transmission air baud rate according to the serial port baud rate

FU4: (Send AT + FU4 in longer distance mode) The idle working current of the module is about 16mA, the serial port baud rate is fixed at 1200bps, and the air baud rate is 500bps


NumberAT command (x means parameter)ResponseEffect
1ATOKCheck whether the module is normal
2AT+BxxxxOK+BxxxxChange the serial port baud rate
3AT+CxxxxOKsetnameChange the channel of wireless communication
4AT+FUxOK+FUxChange the module serial port transparent transmission mode
5AT+PxOK+PxSet the module"s transmit power level
6AT+RyOK + (parameter specified by y)Get the individual parameters of the module
7AT+RXOK + various parametersGet all parameters of the module
9AT+VHC-12_V2.6Query module firmware version information
10AT+SLEEPOK+SLEEPEnter sleep mode
11AT+DEFAULTOK+SLEEPReset

Package included:
1 x HC-12 module


Paypal తో కొనండి
Electronics Ranking

Geekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000MGeekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000MGeekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000MGeekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000MGeekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000M
n

Geekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000M

Geekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000M

Geekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000M

Geekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000M

Geekcreit® HC-12 433MHz SI4463 Wireless Serial Module Wireless Transceiver Transmission Serial Communication Data Board Remote 1000M

Customer Reviews

4.90 out of 5
See all 321 reviews
Write a Review
  • All Reviews (321)
  • Image ( 1 )
  • Video (0)
  • All Star
    • All Star(321)
    • 5 Star (2)
    • 4 Star (0)
    • 3 Star (0)
    • 2 Star (0)
    • 1 Star (0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 27/10/2016

    This little buggers are alot more powerfull than what i though, i got around 200M range, trough several buildings, and on a high RF noise environment. It will automatically convert your data from serial, send it, receive it, and convert it back to serial, so much work it will save you, i really like them as you can see

    Comments (0)
    Show Original
  • 08/05/2018

    Relatively fast Delivery. Tested and found working. Get help at:
    https://howtomechatronics.com/tutorials/arduino/arduino-and-hc-12-long-range-wireless-communication-module/

    Comments (0)
    Show Original
Show:
    12...30

    Total 0 pages

    Go to page

    Go
    Customer Q&As
    Can't find your answer? Ask a new questionorCustomer Service

    Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

    showing 1-9 of 9 |
    Show Original

    A part of the QA has been auto-translated.

    • 0
      Q: what connection type is ant1? u.fl, ipex?
      A:
      According to the datasheet for the HC12 module, it's IPEX20279-001E-03. (I'm sorry, I must have misread your question before. I deleted my old answer).
      Answered by CoilWinder on 26/03/2019Helpful (0)
    • 0
      Q: when I try to enter in to command mode module started sending junk characters
      A:
      you should switch the baud rate to something else for e.g. ~34800 / 9600 it worked for me with a hc-05
      Answered by ytfenyo2005 on 29/01/2019Helpful (0)
    • 0
      Q: What is the SET pin? Will i be able to tie it low (to GND) and would still be able to send and receive and send commands? Or do i have to hook it to a Digital pin on my arduino. I would like to still be able to send commands to this module. Thank You
      A:
      Wennthe module is in "SET" mode, you can't send and receive commands, because the module awaits your settings via Serial. There is no need to constantly have the SET pin grounded, usually you set the module's settings once and that's it.
      Answered by HamsterHybrid on 29/10/2021Helpful (0)
    • 0
      Q: Will the modules I receive have SI4463 or SI4438 chips? The item description says SI4438 however all six pictures of the product have SI4463 chips installed
      A:
      Iordered 2 boards and received the SI4438 chips.
      Answered by aldenbell on 31/05/2020Helpful (0)
    • 0
      Q: How does this differ from the GT-38? Which is the better of the two?
      A:
      You can compare the parameters of the two and choose according to your needs.
      Answered by cody on 18/06/2021Helpful (0)
    • 0
      Q: What is the bluetooth version?
      A:
      No bluetooth version with this board
      Answered by sam on 17/02/2020Helpful (0)
    • 0
      Q: Full details send whats up no. 8409630841 how to use this modul email. ***** please send
      A:
      I use this one: https ://*****
      Answered by Cream5 on 05/01/2020Helpful (0)
    • 0
      Q: Can you use these units be used straight from the box without any programming, as I need a remote control, but don't have a Arduino PC.
      A:
      It doesn't need any programming
      Answered by IllomFluffy on 16/10/2019Helpful (0)
    • 0
      Q: How long before available for australia? Thanks
      A:
      No answer yet.

    నా కార్ట్ కార్ట్ (7)
    నా ఫేవరిట్స్ నా ఫేవరిట్స్ (0)